Kassbohrer Trailers – K.SLS.L 3

Shawtrack > Kassbohrer Trailers – K.SLS.L 3


Kässbohrer’s extendable low bed semi-trailer with 3 axles.

K.SLS.L 3 has 8T tare weight to increase the load capacity, while lashing rings, with 6T capacity each, are positioned on gooseneck, platform frame and side raves for safe and fast loading operation.


Running Gear Options

  •  9 x 2 units of 300 mm galvanised steel side extension brackets, with partial 100 mm extension availability
  • 9 t or 11 t technical capacity SAF drum brakes with or without self-steering axles
  • 12 t or 18 t king pin capacity
  • 12 units 205/75 R 17.5 tyres with steel rims and spare wheel option

Wide Ramp Options

Semi-trailer can be equipped with seven different ramp options:

  • 10° and 14° ramp angle
  • Monolithic spring ramps made of hardwood or steel grid floor
  • 3.530 mm mechanical or hydraulic sliding ramps made of hardwood or steel grid floor
  • Portable Aluminum sliding ramps

Load Security

Semi-trailer equipped with the following load security equipment:

  • 3 x 2 lashing rings with 6 t capacity on gooseneck section
  • 4 x 2 lashing rings with 6 t capacity on platform section
  • 8 x 2 lashing rings with 6 t capacity on side rave

Options for additional load security:

  • Container locks (1 x 20 ft and/or 1 x 40 ft)
  • 8 x 2 units of 52 x 102 mm. side post pockets, pillars and storage box
  • 20 t capacity trestle
  • Aluminium ramp holder under chassis
Back Trailer

Technical Data

H5         5th Wheel Height 1.250 mm
WB       Wheel Base 8.120 mm
L            Overall Length 13.120 mm
GL         Gooseneck Length 3.700 mm
PL         Platform Length 9.420 mm
PH        Platform Height 860 mm
W          Total Width 2.550 mm


Technical Capacities

Tare Weight*                                   8.000 kg ±3%
Kingpin Load                                        18.000 kg
Total Permissible Weight                 48.000 kg
(105 km/hr)

*depends on options

Beavertail Length Options:

The K.SLS.L3 is available with two beavertail sections either 500M or 1000M. The difference in beavertail length means you can get a better a loading angle for your machinery.

The 500M length option:

\FILESRV1TeknikBuro2altyapiGruplarAZ-TeklifAZ00884 SLS.L

The 1000M length option:


To discuss your trailer options further, contact Jamie Baddeley on 01623 633540 or sales@shawtrack.com

Trailer SLS